other
  • November 11, 2022
    During the driving process, car owners will be more concerned about the paint scratches on the car, but have they ever paid attention to the scratches on the wheels?How can I repair the wheel rim if it is scratched? The specific methods for repairing the wheel rim are: 1. Check for scratches, and carefully check whether the scratches extend to the inside of the wheelrim. If not, you only...
  • November 18, 2022
    The wheel rim, also known as the hub, is a barrel-shaped metal part. The center of the tire is mounted on the shaft. The decorative cover of the wheel is generally fixed in the center of the wheel to beautify the appearance of the wheel and protect the wheel and the central rim. At present, part of the structure of the decorative cover of the wheel is directly fixed and welded to the wheel. Today ...
  • November 18, 2022
    With the development of society, people's demand for automobiles is increasing. Automobile wheels are an important part of automobiles, and the performance of the wheels is directly related to the performance of the vehicle. The surface treatment method of magnesium alloy grinding wheel includes grinding the surface of the workpiece of the magnesium alloy grinding wheel to remove oil stains, ultra...
  • November 22, 2022
    There are many parameters involved in replacing the wheels. It is best for interested owners to do their homework first so as not to cause hidden dangers to safety. 1. Center Bore (CB) Refers to the size of the center hole of the hub.Although wheels with different values from the original factory can be installed through positioners, this is not recommended for safety reasons. 2. Section circle di...
  • December 29, 2022
    As we all know, wheels are an important part of automobiles.At present, aluminum alloy wheels are a commonly used automobile wheels.Compared with traditional wheels, aluminum alloy wheels have certain advantages.Therefore, automotive steel experts will introduce the advantages of aluminum alloy wheels. 1.Fuel saving For wheels of the same size, aluminum alloy wheels are 2kg lighter than steel whee...
  • December 29, 2022
    Because of thermal expansion and cold shrinkage, it is okay to keep the tire pressure of a car at 2.3 bar or even to 2.5 bar in winter, but the standard tire pressure specified by each car is different, so the specific requirements depend on the car's user manual, but the tire pressure in winter is 0.1 to 0.2 bar higher than the normal setting. The tire pressure of the car must be maintained withi...
  • February 01, 2023
    Sports car tires are thinner because they can have a stronger grip. When the power output of the vehicle increases, the grip also needs to increase, otherwise it is difficult to cope with the output torque.If you want the grip of the tire to become stronger, you can widen the tire, but this will increase the fuel consumption of the vehicle. Sports car tires generally do not use a way to widen the ...
  • February 01, 2023
    The structure of the automobile rim is simple and can be divided into two parts: 1.Spokes 2.rims.To be precise, the spokes of almost all automobile wheels are currently hollow. The main reasons why they are all hollow designs are: 1.Heat dissipation requirements: If the car is driving for a long time, it will make the wheels of the car very hot; in addition, the braking system will generate a lot ...
  • February 02, 2023
    There are many kinds of wheels according to the diameter, and there are also many kinds according to the width.Then, many models can be divided into different diameters, different widths, and different materials.Some car owners think that the original tires are not advanced enough and want to upgrade. They often widen, reduce the flat ratio, increase the diameter, and change the material. At this ...
  • February 10, 2023
    Some people increase the wheel rim in order to improve the performance of the car. In the case of the same tire diameter, the large wheel rim should be matched with the wide tire. The lateral swing of the car is small and the stability is improved, but the flatter the tire, the thinner its thickness, the worse the shock absorption performance, and the greater the sacrifice of comfort. The complex ...
  • February 13, 2023
    The rim is the support inside the tire.The tire itself is very soft.The internal contour of the tire supports the barrel shape of the tire.The parts mounted on the shaft are called rims. ”Multi-layer environmental protection ion technology" electroplating wheels use powder spraying technology and magnetic control vacuum coating technology.Production technology has replaced the traditional high-pol...
  • February 17, 2023
    The et value of the wheel rim is also called the et offset value, and the et value is the offset value, which is the offset.In fact, it refers to the degree of deviation between the rim installation interface and the centerline of the rim. If the et value is greater and becomes a negative value, then it proves that the rim installed on the body will deviate from the outside. So in other words, dif...
  • February 23, 2023
    The closed forging process of the outer ring of automobile wheel rim includes cutting: the blank is made by sawing process, heating: the blank is heated to 1100~1400℃, upsetting: the blank is upsetting on the upsetting equipment to obtain a drum-shaped blank, pre-forging: The drum-shaped blank is made of pre-forged parts through the pre-forged die, precision forging: The pre-forged parts are ...
  • March 03, 2023
    The selection of wheels, how to choose the best one?Many people will transform the car at will in order to change the performance of the car. The transformation of the car requires professional knowledge. For the wheel rim, we cannot arbitrarily increase its diameter. 1. Don't blindly increase the wheels.Some people increase the wheels to improve the performance of the car. When the outer diameter...
  • March 10, 2023
    Aluminum alloy wheels have the advantages of fuel saving, good heat dissipation, extended engine life, good roundness, and durability. They have been widely used in the automotive industry. Aluminum alloy wheels have a beautiful appearance and have become a fashion in many countries and regions. The surface coating process of aluminum alloy wheel hub includes: first pretreatment of the wheel hub, ...
1 2 3 4
A total of 4 pages
Have Any Questions?
You can contact us any way that is convenient for you. We are available 24/7 via !
Get the latest news and updates about our wheels by subscribing today.

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

whatsapp