other
  • March 03, 2023
    The selection of wheels, how to choose the best one?Many people will transform the car at will in order to change the performance of the car. The transformation of the car requires professional knowledge. For the wheel rim, we cannot arbitrarily increase its diameter. 1. Don't blindly increase the wheels.Some people increase the wheels to improve the performance of the car. When the outer diameter...
  • March 10, 2023
    Aluminum alloy wheels have the advantages of fuel saving, good heat dissipation, extended engine life, good roundness, and durability. They have been widely used in the automotive industry. Aluminum alloy wheels have a beautiful appearance and have become a fashion in many countries and regions. The surface coating process of aluminum alloy wheel hub includes: first pretreatment of the wheel hub, ...
  • March 16, 2023
    When driving in normal times, you may encounter fever in the wheels of the car. Many people may think that the car is damaged or caused by some other reason.This is a very simple question, so don't worry too much. The reason for its heat may be that the tire rubs against the ground for a long time and then generates heat that will be transmitted to it, and then it will cause its temperature to ris...
  • March 16, 2023
    Three-piece aluminum alloy wheels are tightened by a central member and two outer rings and screws. In order to reduce quality, many three-piece aluminum wheels use forgings. Three-piece aluminum wheels use forgings. The three-piece structure provides manufacturers with greater flexibility for small batch manufacturing. For high-speed vehicles, high-temperature tire bursting and reduced braking ef...
  • March 24, 2023
    In fact, whether it is a family car or an operating vehicle, how often a car tire needs to be filled is not judged based on time, but based on the tire pressure value of the car tire to determine whether the tire needs to be inflated.It is not that the tire must be inflated once a month or two. What the owner needs to do is to check the air pressure value of the tire within a certain period of tim...
  • April 20, 2023
    1. In order to maximize safety and reliability, it is recommended that you always check the hub bearings no matter how old the car is-pay attention to whether the bearings have early warning signs of wear: including any friction noise during rotation or abnormal deceleration of the suspension combination wheel when turning.For rear-wheel drive vehicles, it is recommended that the front wheel hub b...
  • April 20, 2023
    Automobile wheels include hub bolt holders, drainage spiral blades and rims. The structural points of the hub bolt holders and rims are provided with drainage spiral blades to drain air to the outside of the hub, but the drainage spiral blades can drive the air flow when the wheel rotates, and the air flow forms wind, but the guide spiral blades guide the air flow from the inside of the car to the...
  • April 27, 2023
    A one piece forged wheel rim is a type of wheel that is made from a single piece of forged aluminum or other lightweight metal. The forging process involves heating the metal and shaping it with hydraulic presses or hammers, resulting in a stronger and more durable wheel compared to cast wheels. One piece forged wheels have become popular among car enthusiasts and high-performance vehicles because...
  • April 27, 2023
    The world's automotive industry is developing in the direction of light weight, high speed, safety, energy saving, comfort and light environmental pollution, and the consumption of automotive aluminum alloy parts is increasing day by day. As one of the important components of the automobile drive system, the wheel is also a kind of component with high safety requirements. It not only carries the w...
  • May 10, 2023
    1.Material selection: The material of the wheel rim will directly affect the strength of the wheel rim.Common materials are aluminum alloy, titanium alloy, carbon fiber, etc. 2.Design structure: The structural design of the rim will affect the strength of the rim, such as the wall thickness and bending radius of the rim. 3.Manufacturing process: Different manufacturing processes will lea...
  • May 10, 2023
    Many car owners like to drive faster and feel very irritating. Even on uneven roads, they don't speed up. However, this behavior can be very damaging to the wheels of the car.Especially for explosion-proof tires with a low flatness ratio, not only is the tire wall thin, but it is also very hard. When this kind of tire is subjected to a strong impact, the force will be directly transmitted to ...
  • May 22, 2023
    Buying a car is a normal thing for many people.But after buying a car and going home, it will always be dirty as time goes by, and you need to wash the car when it is dirty.Car wash shops are places that car owners visit every month. Of course, some car owners like to wash their cars at home and buy a lot of car wash tools. Many consumers will find that when they wash their cars, there is a place ...
  • May 26, 2023
    After decades of development, China's automobile industry has become an important industry in the national economy. With the progress of technology and the improvement of various performance indicators of automobiles, governments of various countries have become more and more stringent requirements for energy conservation and environmental protection. Therefore, automobile lightweight has become t...
  • May 26, 2023
    If you encounter a situation where the car tire is pierced with a small nail and taken off but there is no air leakage, it doesn't matter, we can not repair it.But we need to carry out testing. We can't just ignore it if it looks like there is no air leakage to the naked eye, but we can continue to use it after we are truly sure that there is no air leakage. It doesn't matter that the car tire is ...
  • May 26, 2023
    The wheel is made into a circle and the characteristics of the circle are closely related, and the distance from the center of the circle to any point on the circle is equal.The wheel is circular. The axle is pressed on the center of the circle, and the wheel rolls on the ground. The distance between the axle and the ground is always the radius of the wheel. As long as the road is relatively flat,...
1 2 3 4 5
A total of 5 pages
Have Any Questions?
You can contact us any way that is convenient for you. We are available 24/7 via !
Get the latest news and updates about our wheels by subscribing today.

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

whatsapp