Views:0 Author:Site Editor Publish Time: 2021-10-08 Origin:Site
There is a complementary connection between the single and the whole, and the single and the single are mutually supportive. However, the two together often present a small trouble when the allocation is improper. Let us look at the brake caliper against the wheel rim.
How to deal with the brake caliper rubbing against the rim?
There is no need to lower the body when the brake calipers rub against the wheel rim, but the need to replace the tires has no major impact on fuel consumption. The degree of wear is not related to the size of the tires. It is mainly related to the quality of the tires. If you are replacing a well-known tire brand , Such as Michelin, Bridgestone, Goodyear, Pirelli and other tires are of very good quality.
Daily maintenance is also indispensable. When the temperature of the wheel rim is high, it should be allowed to cool naturally before cleaning. Never use cold water to clean it; otherwise, the aluminum alloy wheel rim will be damaged or even the brake disc will be deformed. And affect the braking effect. In addition, cleaning aluminum alloy wheels with cleaning agents at high temperatures will cause chemical reactions on the surface of the wheels, loss of luster, and affect the beauty. When the wheel rim is stained with tar that is difficult to remove, if the general cleaner is in vain, you can try to remove it with a brush, but do not use a brush that is too hard, especially an iron brush, to avoid damage to the surface of the rim. In addition, when the vehicle address area is close to the seashore, the wheels should be cleaned frequently to avoid corrosion of the aluminum surface by salt.
The car should be diligent to wash the rim when it is first used. The car that is driven every day should be washed at least once a week, first rinse with clean water, then rinse with detergent and sponge, and then rinse with a lot of water. . When there are stains that are difficult to remove on the surface of the wheel rim, a professional cleaning agent should be used. This cleaning agent can often gently and effectively remove the stains and reduce the damage to the aluminum alloy surface. In addition, there is a metal protective film on the wheel rim itself, so special care should be taken not to use paint brightener or other abrasive materials when cleaning. Also pay attention to the wheel during driving to avoid the "hard damage" caused by scratching the wheel. Once there is a scratch or deformation, it should be revised and innovated in time, especially the deformed wheel, and it should be corrected in time; if the wheel is deformed, drive It will be trembling, especially if you can't go to high speed.